Let GF(q) denote a finite field with q (a prime power) elements. A code is a subset C of some finite-dimensional vector space V over GF(q). The length of C is the dimension of V. Usually, V=GF(q)^n and the length is the number of coordinate entries. When C is itself a vector space over GF(q) then it is called a linear code and the dimension of C is its dimension as a vector space over GF(q).
In GUAVA, a `codeword' is a GAP record, with one of its components being an element in V. Likewise, a `code' is a GAP record, with one of its components being a subset (or subspace with given basis, if C is linear) of V.
gap> C:=RandomLinearCode(20,10,GF(4));
a [20,10,?] randomly generated code over GF(4)
gap> c:=Random(C);
[ 1 a 0 0 0 1 1 a^2 0 0 a 1 1 1 a 1 1 a a 0 ]
gap> NamesOfComponents(C);
[ "LeftActingDomain", "GeneratorsOfLeftOperatorAdditiveGroup", "WordLength",
"GeneratorMat", "name", "Basis", "NiceFreeLeftModule", "Dimension",
"Representative", "ZeroImmutable" ]
gap> NamesOfComponents(c);
[ "VectorCodeword", "WordLength", "treatAsPoly" ]
gap> c!.VectorCodeword;
[ immutable compressed vector length 20 over GF(4) ]
gap> Display(last);
[ Z(2^2), Z(2^2), Z(2^2), Z(2)^0, Z(2^2), Z(2^2)^2, 0*Z(2), Z(2^2), Z(2^2),
Z(2)^0, Z(2^2)^2, 0*Z(2), 0*Z(2), Z(2^2), 0*Z(2), 0*Z(2), 0*Z(2), Z(2^2)^2,
Z(2)^0, 0*Z(2) ]
gap> C!.Dimension;
10
|
Mathematically, a `codeword' is an element of a code C, but in GUAVA the Codeword and VectorCodeword commands have implementations which do not check if the codeword belongs to C (i.e., are independent of the code itself). They exist primarily to make it easier for the user to construct a the associated GAP record. Using these commands, one can enter into a GAP both a codeword c (belonging to C) and a received word r (not belonging to C) using the same command. The user can input codewords in different formats (as strings, vectors, and polynomials), and output information is formatted in a readable way.
A codeword c in a linear code C arises in practice by an initial encoding of a 'block' message m, adding enough redundancy to recover m after c is transmitted via a 'noisy' communication medium. In GUAVA, for linear codes, the map mlongmapsto c is computed using the command c:=m*C and recovering m from c is obtained by the command InformationWord(C,c). These commands are explained more below.
Many operations are available on codewords themselves, although codewords also work together with codes (see chapter 4. on Codes).
The first section describes how codewords are constructed (see Codeword (3.1-1) and IsCodeword (3.1-3)). Sections 3.2 and 3.3 describe the arithmetic operations applicable to codewords. Section 3.4 describe functions that convert codewords back to vectors or polynomials (see VectorCodeword (3.4-1) and PolyCodeword (3.4-2)). Section ??? describe functions that change the way a codeword is displayed (see TreatAsVector (3.5-1) and TreatAsPoly (3.5-2)). Finally, Section 3.6 describes a function to generate a null word (see NullWord (3.6-1)) and some functions for extracting properties of codewords (see DistanceCodeword (3.6-2), Support (3.6-3) and WeightCodeword (3.6-4)).
> Codeword( obj[, n][, F] ) | ( function ) |
Codeword returns a codeword or a list of codewords constructed from obj. The object obj can be a vector, a string, a polynomial or a codeword. It may also be a list of those (even a mixed list).
If a number n is specified, all constructed codewords have length n. This is the only way to make sure that all elements of obj are converted to codewords of the same length. Elements of obj that are longer than n are reduced in length by cutting of the last positions. Elements of obj that are shorter than n are lengthened by adding zeros at the end. If no n is specified, each constructed codeword is handled individually.
If a Galois field F is specified, all codewords are constructed over this field. This is the only way to make sure that all elements of obj are converted to the same field F (otherwise they are converted one by one). Note that all elements of obj must have elements over F or over `Integers'. Converting from one Galois field to another is not allowed. If no F is specified, vectors or strings with integer elements will be converted to the smallest Galois field possible.
Note that a significant speed increase is achieved if F is specified, even when all elements of obj already have elements over F.
Every vector in obj can be a finite field vector over F or a vector over `Integers'. In the last case, it is converted to F or, if omitted, to the smallest Galois field possible.
Every string in obj must be a string of numbers, without spaces, commas or any other characters. These numbers must be from 0 to 9. The string is converted to a codeword over F or, if F is omitted, over the smallest Galois field possible. Note that since all numbers in the string are interpreted as one-digit numbers, Galois fields of size larger than 10 are not properly represented when using strings. In fact, no finite field of size larger than 11 arises in this fashion at all.
Every polynomial in obj is converted to a codeword of length n or, if omitted, of a length dictated by the degree of the polynomial. If F is specified, a polynomial in obj must be over F.
Every element of obj that is already a codeword is changed to a codeword of length n. If no n was specified, the codeword doesn't change. If F is specified, the codeword must have base field F.
gap> c := Codeword([0,1,1,1,0]); [ 0 1 1 1 0 ] gap> VectorCodeword( c ); [ 0*Z(2), Z(2)^0, Z(2)^0, Z(2)^0, 0*Z(2) ] gap> c2 := Codeword([0,1,1,1,0], GF(3)); [ 0 1 1 1 0 ] gap> VectorCodeword( c2 ); [ 0*Z(3), Z(3)^0, Z(3)^0, Z(3)^0, 0*Z(3) ] gap> Codeword([c, c2, "0110"]); [ [ 0 1 1 1 0 ], [ 0 1 1 1 0 ], [ 0 1 1 0 ] ] gap> p := UnivariatePolynomial(GF(2), [Z(2)^0, 0*Z(2), Z(2)^0]); Z(2)^0+x_1^2 gap> Codeword(p); x^2 + 1 |
This command can also be called using the syntax Codeword(obj,C). In this format, the elements of obj are converted to elements of the same ambient vector space as the elements of a code C. The command Codeword(c,C) is the same as calling Codeword(c,n,F), where n is the word length of C and the F is the ground field of C.
gap> C := WholeSpaceCode(7,GF(5));
a cyclic [7,7,1]0 whole space code over GF(5)
gap> Codeword(["0220110", [1,1,1]], C);
[ [ 0 2 2 0 1 1 0 ], [ 1 1 1 0 0 0 0 ] ]
gap> Codeword(["0220110", [1,1,1]], 7, GF(5));
[ [ 0 2 2 0 1 1 0 ], [ 1 1 1 0 0 0 0 ] ]
gap> C:=RandomLinearCode(10,5,GF(3));
a linear [10,5,1..3]3..5 random linear code over GF(3)
gap> Codeword("1000000000",C);
[ 1 0 0 0 0 0 0 0 0 0 ]
gap> Codeword("1000000000",10,GF(3));
[ 1 0 0 0 0 0 0 0 0 0 ]
|
> CodewordNr( C, list ) | ( function ) |
CodewordNr returns a list of codewords of C. list may be a list of integers or a single integer. For each integer of list, the corresponding codeword of C is returned. The correspondence of a number i with a codeword is determined as follows: if a list of elements of C is available, the i^th element is taken. Otherwise, it is calculated by multiplication of the i^th information vector by the generator matrix or generator polynomial, where the information vectors are ordered lexicographically. In particular, the returned codeword(s) could be a vector or a polynomial. So CodewordNr(C, i) is equal to AsSSortedList(C)[i], described in the next chapter. The latter function first calculates the set of all the elements of C and then returns the i^th element of that set, whereas the former only calculates the i^th codeword.
gap> B := BinaryGolayCode(); a cyclic [23,12,7]3 binary Golay code over GF(2) gap> c := CodewordNr(B, 4); x^22 + x^20 + x^17 + x^14 + x^13 + x^12 + x^11 + x^10 gap> R := ReedSolomonCode(2,2); a cyclic [2,1,2]1 Reed-Solomon code over GF(3) gap> AsSSortedList(R); [ [ 0 0 ], [ 1 1 ], [ 2 2 ] ] gap> CodewordNr(R, [1,3]); [ [ 0 0 ], [ 2 2 ] ] |
> IsCodeword( obj ) | ( function ) |
IsCodeword returns `true' if obj, which can be an object of arbitrary type, is of the codeword type and `false' otherwise. The function will signal an error if obj is an unbound variable.
gap> IsCodeword(1);
false
gap> IsCodeword(ReedMullerCode(2,3));
false
gap> IsCodeword("11111");
false
gap> IsCodeword(Codeword("11111"));
true
|
> =( c1, c2 ) | ( function ) |
The equality operator c1 = c2 evaluates to `true' if the codewords c1 and c2 are equal, and to `false' otherwise. Note that codewords are equal if and only if their base vectors are equal. Whether they are represented as a vector or polynomial has nothing to do with the comparison.
Comparing codewords with objects of other types is not recommended, although it is possible. If c2 is the codeword, the other object c1 is first converted to a codeword, after which comparison is possible. This way, a codeword can be compared with a vector, polynomial, or string. If c1 is the codeword, then problems may arise if c2 is a polynomial. In that case, the comparison always yields a `false', because the polynomial comparison is called.
The equality operator is also denoted EQ, and EQ(c1,c2) is the same as c1 = c2. There is also an inequality operator, < >, or not EQ.
gap> P := UnivariatePolynomial(GF(2), Z(2)*[1,0,0,1]);
Z(2)^0+x_1^3
gap> c := Codeword(P, GF(2));
x^3 + 1
gap> P = c; # codeword operation
true
gap> c2 := Codeword("1001", GF(2));
[ 1 0 0 1 ]
gap> c = c2;
true
gap> C:=HammingCode(3);
a linear [7,4,3]1 Hamming (3,2) code over GF(2)
gap> c1:=Random(C);
[ 1 0 0 1 1 0 0 ]
gap> c2:=Random(C);
[ 0 1 0 0 1 0 1 ]
gap> EQ(c1,c2);
false
gap> not EQ(c1,c2);
true
|
> +( c1, c2 ) | ( function ) |
The following operations are always available for codewords. The operands must have a common base field, and must have the same length. No implicit conversions are performed.
The operator + evaluates to the sum of the codewords c1 and c2.
gap> C:=RandomLinearCode(10,5,GF(3)); a linear [10,5,1..3]3..5 random linear code over GF(3) gap> c:=Random(C); [ 1 0 2 2 2 2 1 0 2 0 ] gap> Codeword(c+"2000000000"); [ 0 0 2 2 2 2 1 0 2 0 ] gap> Codeword(c+"1000000000"); |
The last command returns a GAP ERROR since the `codeword' which GUAVA associates to "1000000000" belongs to GF(2) and not GF(3).
> -( c1, c2 ) | ( function ) |
Similar to addition: the operator - evaluates to the difference of the codewords c1 and c2.
> +( v, C ) | ( function ) |
The operator v+C evaluates to the coset code of code C after adding a `codeword' v to all codewords in C. Note that if c in C then mathematically c+C=C but GUAVA only sees them equal as sets. See CosetCode (6.1-17).
Note that the command C+v returns the same output as the command v+C.
gap> C:=RandomLinearCode(10,5);
a [10,5,?] randomly generated code over GF(2)
gap> c:=Random(C);
[ 0 0 0 0 0 0 0 0 0 0 ]
gap> c+C;
[ add. coset of a [10,5,?] randomly generated code over GF(2) ]
gap> c+C=C;
true
gap> IsLinearCode(c+C);
false
gap> v:=Codeword("100000000");
[ 1 0 0 0 0 0 0 0 0 ]
gap> v+C;
[ add. coset of a [10,5,?] randomly generated code over GF(2) ]
gap> C=v+C;
false
gap> C := GeneratorMatCode( [ [1, 0,0,0], [0, 1,0,0] ], GF(2) );
a linear [4,2,1]1 code defined by generator matrix over GF(2)
gap> Elements(C);
[ [ 0 0 0 0 ], [ 0 1 0 0 ], [ 1 0 0 0 ], [ 1 1 0 0 ] ]
gap> v:=Codeword("0011");
[ 0 0 1 1 ]
gap> C+v;
[ add. coset of a linear [4,2,4]1 code defined by generator matrix over GF(2) ]
gap> Elements(C+v);
[ [ 0 0 1 1 ], [ 0 1 1 1 ], [ 1 0 1 1 ], [ 1 1 1 1 ] ]
|
In general, the operations just described can also be performed on codewords expressed as vectors, strings or polynomials, although this is not recommended. The vector, string or polynomial is first converted to a codeword, after which the normal operation is performed. For this to go right, make sure that at least one of the operands is a codeword. Further more, it will not work when the right operand is a polynomial. In that case, the polynomial operations (FiniteFieldPolynomialOps) are called, instead of the codeword operations (CodewordOps).
Some other code-oriented operations with codewords are described in 4.2.
> VectorCodeword( obj ) | ( function ) |
Here obj can be a code word or a list of code words. This function returns the corresponding vectors over a finite field.
gap> a := Codeword("011011");;
gap> VectorCodeword(a);
[ 0*Z(2), Z(2)^0, Z(2)^0, 0*Z(2), Z(2)^0, Z(2)^0 ]
|
> PolyCodeword( obj ) | ( function ) |
PolyCodeword returns a polynomial or a list of polynomials over a Galois field, converted from obj. The object obj can be a codeword, or a list of codewords.
gap> a := Codeword("011011");;
gap> PolyCodeword(a);
x_1+x_1^2+x_1^4+x_1^5
|
> TreatAsVector( obj ) | ( function ) |
TreatAsVector adapts the codewords in obj to make sure they are printed as vectors. obj may be a codeword or a list of codewords. Elements of obj that are not codewords are ignored. After this function is called, the codewords will be treated as vectors. The vector representation is obtained by using the coefficient list of the polynomial.
Note that this only changes the way a codeword is printed. TreatAsVector returns nothing, it is called only for its side effect. The function VectorCodeword converts codewords to vectors (see VectorCodeword (3.4-1)).
gap> B := BinaryGolayCode(); a cyclic [23,12,7]3 binary Golay code over GF(2) gap> c := CodewordNr(B, 4); x^22 + x^20 + x^17 + x^14 + x^13 + x^12 + x^11 + x^10 gap> TreatAsVector(c); gap> c; [ 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 1 0 0 1 0 1 ] |
> TreatAsPoly( obj ) | ( function ) |
TreatAsPoly adapts the codewords in obj to make sure they are printed as polynomials. obj may be a codeword or a list of codewords. Elements of obj that are not codewords are ignored. After this function is called, the codewords will be treated as polynomials. The finite field vector that defines the codeword is used as a coefficient list of the polynomial representation, where the first element of the vector is the coefficient of degree zero, the second element is the coefficient of degree one, etc, until the last element, which is the coefficient of highest degree.
Note that this only changes the way a codeword is printed. TreatAsPoly returns nothing, it is called only for its side effect. The function PolyCodeword converts codewords to polynomials (see PolyCodeword (3.4-2)).
gap> a := Codeword("00001",GF(2));
[ 0 0 0 0 1 ]
gap> TreatAsPoly(a); a;
x^4
gap> b := NullWord(6,GF(4));
[ 0 0 0 0 0 0 ]
gap> TreatAsPoly(b); b;
0
|
> NullWord( n, F ) | ( function ) |
Other uses: NullWord( n ) (default F=GF(2)) and NullWord( C ). NullWord returns a codeword of length n over the field F of only zeros. The integer n must be greater then zero. If only a code C is specified, NullWord will return a null word with both the word length and the Galois field of C.
gap> NullWord(8);
[ 0 0 0 0 0 0 0 0 ]
gap> Codeword("0000") = NullWord(4);
true
gap> NullWord(5,GF(16));
[ 0 0 0 0 0 ]
gap> NullWord(ExtendedTernaryGolayCode());
[ 0 0 0 0 0 0 0 0 0 0 0 0 ]
|
> DistanceCodeword( c1, c2 ) | ( function ) |
DistanceCodeword returns the Hamming distance from c1 to c2. Both variables must be codewords with equal word length over the same Galois field. The Hamming distance between two words is the number of places in which they differ. As a result, DistanceCodeword always returns an integer between zero and the word length of the codewords.
gap> a := Codeword([0, 1, 2, 0, 1, 2]);; b := NullWord(6, GF(3));; gap> DistanceCodeword(a, b); 4 gap> DistanceCodeword(b, a); 4 gap> DistanceCodeword(a, a); 0 |
> Support( c ) | ( function ) |
Support returns a set of integers indicating the positions of the non-zero entries in a codeword c.
gap> a := Codeword("012320023002");; Support(a);
[ 2, 3, 4, 5, 8, 9, 12 ]
gap> Support(NullWord(7));
[ ]
|
The support of a list with codewords can be calculated by taking the union of the individual supports. The weight of the support is the length of the set.
gap> L := Codeword(["000000", "101010", "222000"], GF(3));; gap> S := Union(List(L, i -> Support(i))); [ 1, 2, 3, 5 ] gap> Length(S); 4 |
> WeightCodeword( c ) | ( function ) |
WeightCodeword returns the weight of a codeword c, the number of non-zero entries in c. As a result, WeightCodeword always returns an integer between zero and the word length of the codeword.
gap> WeightCodeword(Codeword("22222"));
5
gap> WeightCodeword(NullWord(3));
0
gap> C := HammingCode(3);
a linear [7,4,3]1 Hamming (3,2) code over GF(2)
gap> Minimum(List(AsSSortedList(C){[2..Size(C)]}, WeightCodeword ) );
3
|
generated by GAPDoc2HTML